Stinging from those high energy bills thanks to your electric hot water system? Mate, you’re not alone. We recognise the financial bite can be a bit much to swallow. What we found out is that if your system is running at its best, you could chop off up to 20% on energy costs! In this blog, we’ll run you through five sure-fire tips for getting your hot water system working full tilt, potentially saving you a fair few dollars while also extending its life expectancy.
Keen for a toastier bath time that won’t cost an arm and leg? Let’s get cracking!
Key Takeaways
- Properly insulating your electric hot water system can minimise heat loss, save energy, and reduce your energy bills.
- Adjusting the thermostat temperature to a lower setting can significantly increase efficiency without sacrificing comfort.
- Installing heat traps and anti – convection valves helps prevent heat loss from your hot water tank, improving overall efficiency and saving you money on energy bills.
- Regularly flushing out sediment buildup in the tank improves efficiency and extends the lifespan of your hot water system.
Understanding Your Electric Hot Water System
To maximise efficiency and save money on energy bills, it is important to understand how your electric hot water system works and the main ways to reduce energy use. Regular
maintenance is also crucial for optimal efficiency.
Main ways to reduce energy use
We can save energy with a few key steps. First, we choose the right size of the water heater for our needs. Smaller houses might

use continuous flow systems that heat water only as we need it.
This way, we don’t waste power heating up extra water. Second, think about using more efficient heaters like heat pump or high-performance solar systems. They may cost more at first but they save money over time because they use 30% less energy than normal ones.
Importance of regular maintenance
Regular maintenance is crucial for maximising the efficiency of your electric hot water system. By performing routine upkeep, you can ensure that your system operates at optimal efficiency, saving you money on energy bills and extending its lifespan.
Regular maintenance includes tasks like checking and maintaining the anode rod in the tank to prevent damage, flushing out sediment from the tank to improve efficiency, and keeping the tank clean.
It’s also important to schedule professional inspections to identify any potential issues early on and make necessary repairs or adjustments. With regular maintenance, you can enjoy a more efficient hot water system that meets your household’s needs while saving energy and money in the long run.
Tips for Increasing Efficiency
Unlock peak efficiency with these tips for your electric hot water system. Insulate, adjust the

thermostat, use heat traps, and more. Upgrade now!
Proper insulation
Insulating your electric hot water system is essential for maximising efficiency and reducing energy waste. By adding insulation to the tank and pipes, you can prevent heat loss and keep the water hot
for longer periods.
This means that your system won’t have to work as hard to reheat the water, saving you money on your energy bills. Proper insulation also helps maintain a consistent temperature, ensuring that you always have hot water when you need it.
So make sure to insulate your hot water system properly and enjoy the benefits of improved efficiency and cost savings.
Adjusting temperature
To increase the efficiency of your electric hot water system, adjusting the temperature can make a big difference. Lowering the thermostat by just a few degrees can save you money on energy bills without sacrificing comfort.
Most hot water systems have a default temperature setting of around 60 degrees Celsius, but you can safely lower it to 50 or even 45 degrees Celsius. Be mindful that if you set the temperature too low, you may risk not having enough hot water when you need it.
So find a balance that works for your household’s needs and enjoy the benefits of both optimal efficiency and reduced energy consumption.
Installing heat traps and anti-convection valves
To maximise the efficiency of your electric hot water system, consider installing heat traps and anti-convection valves. These small devices help prevent heat loss from your hot water tank, keeping the water hotter for longer periods of time.
Heat traps are valves that are installed on the inlet and outlet pipes of the tank, allowing cold water to flow in but preventing hot water from escaping. This helps reduce energy wastage and keeps your hot water at a consistent temperature.
Similarly, anti-convection valves prevent heat loss through convection by creating barriers within the pipes that inhibit the transfer of heat to surrounding areas. By installing these simple devices, you can improve the overall efficiency of your electric hot water system and save money on energy bills in the long run.
Flushing sediment
Flushing sediment from your electric hot water system is a simple yet effective way to maximise its efficiency. Over time, sediment like dirt and minerals can accumulate in the bottom of the tank, reducing the system’s ability to heat water efficiently.
By regularly flushing out this sediment, you can improve energy efficiency and extend the lifespan of your hot water system. Flushing out sediment involves draining a portion of water from the tank, allowing any accumulated debris to be removed.
This process helps ensure that your hot water system operates at optimal efficiency, saving you money on energy bills and preventing potential issues down the line. So don’t forget to include sediment flushing as part of your regular maintenance routine for your electric hot water system!
Using low flow showerheads and faucets
Using low flow showerheads and faucets is a great way to increase the efficiency of your electric hot water system. These fixtures are designed to reduce the amount of water flowing through them, which means less hot water is being used.
By using low flow showerheads and faucets, you can save both water and energy, ultimately lowering your utility bills. In fact, according to important facts from Hot Water Brisbane experts, adopting water efficient appliances like these can help enhance the energy efficiency of your hot water system while meeting your specific needs.
So consider upgrading your showerheads and faucets to low flow options for a more efficient hot water experience.
Benefits of Improving Hot Water System Efficiency
Improving the efficiency of your hot water system brings several benefits, including saving

money on energy bills and extending the lifespan of your system.
Save money on energy bills
By making your electric hot water system more efficient, you can save money on energy bills. One way to do this is by
properly insulating the tank and pipes, as this helps to retain heat and reduces the need for constant reheating.
Another tip is to adjust the thermostat temperature to a lower setting, as even a small decrease can lead to significant energy savings. Additionally, installing heat traps and anti-convection valves can prevent heat loss through the pipes.
Regularly flushing out sediment from the tank also improves efficiency and prolongs the lifespan of your hot water system. Finally, using low-flow showerheads and faucets helps reduce water usage while still providing ample hot water.
Extended lifespan of system
Improving the efficiency of your electric hot water system can also lead to an extended lifespan for the system. When you take steps to maximise efficiency, such as adjusting the temperature, flushing sediment from the tank, and properly maintaining the system, it can reduce wear and tear on the components.
This means that your hot water system will be able to function optimally for a longer period of time, saving you money on repairs or having to replace it altogether. By implementing these proven tips for increasing efficiency in your electric hot water system, you can enjoy reliable hot water for years to come.
Pro Efficiency Tips: Connect with Us for Electric Hot Water Solutions
By implementing these proven tips, you can maximise the efficiency of your electric hot water system. Proper insulation, adjusting the temperature, installing heat traps and anti-convection valves, flushing sediment, and using water-efficient appliances are all effective ways to save money and extend the lifespan of your system.
With these strategies in place, you can enjoy optimal efficiency and a reliable supply of hot water for your home.